2023.06.08

The Adverse Effects of Oil and Grease on Mild Steel Pipes

SC many sizes

Consuming the Mild Steel oxygen injection pipes as production material will provide stable performance during the steel production process. Customers are sometimes unaware of the problems that can occur when using unsecured mild steel pipes. Daiwa Lance provides oxygen injection pipes with a clean surface, which means there is no grease or oil on the pipe's outside. As a result, there are no hazards for the operator. When there is no oxygen leakage due to good seam and quality control, mishaps during the operation can be avoided. In this blog, we are going to show you the negative effect of poor-quality oxygen injection pipes that could occur and affect the production process. Additionally, we are following international standards to produce our oxygen injection lance pipes to support and provide great performance during the steel production process.

Negative Effect of Poor-Quality Mild Steel Pipes

Compared to other pipes, Mild Steel Pipes are more susceptible to rust and corrosion. To lessen the likelihood of rust and corrosion on MS Pipes, a protective coating must be applied to the pipe's outside. Basically, Mild Steel pipes produced from the great quality coil will enhance the performance compared to 2nd-grade steel coil. Other than that low carbon Mild steel pipes can readily break under minor stress since the oxygen injection pipes are less rigid and have low tensile strength.

Corrosion Occurring Due to Low-Quality Injection Pipes

Mild steel pipe production requires lubrication oil for the tube mill line. This is dangerous when the pipe is used for oxygen injection pipe and carbon injection pipe purposes due to high-temperature circumstances and so easy to get fire. The 2nd-grade steel pipes are sometimes not well welded in the welding seam and cause oxygen leakage during use, very dangerous for workers and equipment, it may lead to a dangerous explosion.

Daiwa SC Pipe as General Oxygen Injection Pipe

Steel with a low percentage of carbon (less than 0.25%) is used to make mild steel (MS) pipes. Due to their lower carbon content and lack of hardening, the oxygen injection pipes are simple to operate. Since Mild Steel Pipes are made of mild steel as Oxygen Injection pipe, joining and curving them into a variety of sizes and shapes for pipelining and tube applications is straightforward.
Daiwa SC Lance mild steel pipes are oxygen injection pipe that is constructed from hot-rolled steel sheets without the use of grease- and oil-covered pipes and is welded using a high-frequency machine. Daiwa SC Lance generates high temperatures of above 3,000°C by blowing oxygen and melting steel that has solidified and slag on equipment.

SC Lance 3pcs

Photo of Daiwa SC lance Pipes

Applications of Daiwa SC Lance Pipe:

Opening Tap Hole

Removing Slag
Cleaning Purpose

Connections types of Daiwa SC Lance Pipe:

Plain ends
Thread & socket
Press Coupling
Special Chamfering *

* Depending on the customer's requirements for our oxygen injection pipes

Daiwa Lance's Certification for High-Quality Production

Daiwa Lance we produce and supply our SC LANCE, especially for this purpose free from grease or oil.
We use high-frequency welding equipment with an eddy currency detector for the steel mill line.
Also, we have ISO 9001, 14001, and JIS standards, following these standards with quality and company system control.

ISO 9001:2015 - Compliance Management System

Our products are produced and following strictly ISO (9001:2015 and 14001:2015), which could bring effectiveness and safety during the operation.

If you want to have a look at our ISO 9001 and 14001 certificate, please click the link below.

Since 2017, we acquired JIS Standard Certification (SGP, STK, STKM) to improve our oxygen injection pipes production process and product quality performance.

Conclusion

You will receive high-quality performance and contribute to environmental protection by consuming our oxygen injection pipes. We provide SC Lance pipes with a clean surface, which means there is no oil or grease on the pipe's surface, eliminating any potential hazards for the operator. If there is no oxygen leakage due to good seam and quality control from our oxygen injection pipes, customers can avoid mishaps during the operation.

For more details, please feel free to consult with our sales department or sales agent. We will always do our best effort to serve you.