Maximize the Pipe Usage with Daiwa Lance Connections

The quality of oxygen lance pipes is definitely important to enhance user performance and provide cost savings. On the flip side, providing a suitable connection for Calorized Lance Pipe (CA), Thermic Lance Pipe (TL) and SC Lance Pipe (SC) will make the operation as fast as the process can be, and so operating time would be reduced to save cost by fully using the lance pipe, time reduction, and safety during operating in front of the furnace. A suitable connection table is made to let customers understand clearly about connection types that Daiwa Lance is currently introducing to customers:

• Screw Socket: Operator can connect pipes with thread and socket by using pipe wrench. When using the above-mentioned types of Calorized Lance Pipes, you can connect pipes together by hand with a socket and use a small tool like the wrench to tighten the connection. This way of doing can help you to connect pipes quickly and immediately while fully using the Calorized Lance Pipes without remaining anything.

• Welding: we can use a single pipe or connect the pipes by welding them together to prevent air leakage. We recommend using an inner sleeve when welding the pipes to enhance strength and adhesion between the 2 pipes.

• Pressing Machine with Press Socket: Press machine can be used to connect pipes using a threadless coupling. With higher volume for consumption, you can consider using this type thanks to the good air leakage resistance and easy operation.

Thermic Lance Pipe Connection

• Plain ends -- Some customers prefer to use plain ends Thermic without any connection when one piece is enough to complete the job.

• Use with thread & socket: it is easy to connect 2 pipes no need to waste half-used THERMIC. For this type, we use a wrench for tightening while connecting the pipe. Sometimes, we use sealing or rubber sealing tape as other alternatives.

• Use with Quick Coupling: it's an easy connection type, by just hitting THERMIC and coupling together to the wall or floor a coup of times then connected. The most popular size for this quick coupling type is ¼”(OD 13.8mm) x Length TYPE-T.

SC Lance Pipe Connection

 Some of the connection of SC Lance pipe are similar to Daiwa Calorized Lance and Daiwa Thermic Lance, including Threaded & Socket, Press Coupling, and Plain End. For the Simple Coupling connection, it is special one used for Daiwa SC Lance pipe as below drawing.